- Smallest footprint in the series At 950 × 650 × 250 mm and 130 kg it is the only ZL Series model light enough and small enough for genuinely constrained layouts.
- 1,350 mm right-angle passing width That is the narrowest of the four models, against a 498 mm turning radius.
- 600 kg rated load The lowest capacity in the series, which is the trade made for the compact envelope.
- ±10 mm positioning accuracy Accuracy is ±10 mm and ±1°, the finer of the two grades in the series.
- LSLAM or QR-code navigation Either navigation method can be specified, with differential drive and a touchscreen HMI.
- 6 to 8 hours on a 24 Ah pack The 48 V, 24 Ah battery is rated for 1,500 cycles and recharges fully in up to 1.5 hours, with automatic and manual charging.
Description
The Q3-600 is the small one. At 950 × 650 × 250 mm and 130 kg it has the smallest footprint and by far the lightest machine mass in ZLINK's four-model ZL Series, and it is rated for 600 kg — the lowest capacity of the four.
Those two facts travel together. If a job does not need 1,000 or 1,500 kg, the Q3-600 trades that capacity for the ability to work in a layout the larger models cannot reach: a 498 mm turning radius and a 1,350 mm minimum right-angle passing width, the narrowest figures in the series. The turning radius is not an aisle width and body width is not either, so plan against the 1,350 mm figure and check it with the load on board.
Navigation is LSLAM with a QR-code option, differential drive and a touchscreen HMI, with positioning accuracy of ±10 mm and ±1° — the finer of the two accuracy grades in the series. Its 48 V, 24 Ah battery is rated for 1,500 charge cycles, 6 to 8 hours of operation and a full recharge in up to 1.5 hours, by automatic or manual charging.
Lifting dimensions are hc 120 mm and h2–h3 60 mm, specified as separate values. A light load that is physically wide can still fail a route check that its mass would pass, so record the load's dimensions as well as its weight. Any fixture, carrier or software connection is defined in the project scope rather than supplied as standard.
Key Capabilities
- Smallest footprint in the series: At 950 × 650 × 250 mm and 130 kg it is the only ZL Series model light enough and small enough for genuinely constrained layouts.
- 1,350 mm right-angle passing width: That is the narrowest of the four models, against a 498 mm turning radius.
- 600 kg rated load: The lowest capacity in the series, which is the trade made for the compact envelope.
- ±10 mm positioning accuracy: Accuracy is ±10 mm and ±1°, the finer of the two grades in the series.
- LSLAM or QR-code navigation: Either navigation method can be specified, with differential drive and a touchscreen HMI.
- 6 to 8 hours on a 24 Ah pack: The 48 V, 24 Ah battery is rated for 1,500 cycles and recharges fully in up to 1.5 hours, with automatic and manual charging.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | ZLINK |
|---|---|
| Manufacturer | ZLINK Technologies (Zhengzhou), China |
| Model | Q3-600 (ZL Series) |
| Product Type | Compact automated guided vehicle |
| Rated Load | 600 kg |
| Dimensions (L × W × H) | 950 × 650 × 250 mm |
| Machine Mass | 130 kg |
| Turning Radius | 498 mm |
| Minimum Right-Angle Passing Width | 1,350 mm |
| Lifting Dimension hc | 120 mm |
| Lifting Dimension h2–h3 | 60 mm |
| Navigation | LSLAM / QR code |
| Positioning Accuracy | ±10 mm; ±1° |
| Drive | Differential |
| HMI | Touchscreen |
| Battery | Lithium iron, 48 V, 24 Ah (capacity customisable) |
| Charge / Discharge Cycles | 1,500 |
| Rated Operating Time | 6 to 8 hours |
| Recharge Time from Full Discharge | Up to 1.5 hours |
| Charging Methods | Automatic and manual |
| Load Carrier or Fixture | Confirm at quote |
| Safety Sensor Package | Confirm at quote |
| Warehouse or Production Software Interface | Confirm at quote |
| Travel Speed | Confirm at quote |
Industries
Frequently Asked Questions
600 kg, the lowest capacity in the ZL Series. The load and any carrier still need an application review, because mass is only one of the compatibility questions.
950 × 650 × 250 mm with a machine mass of 130 kg, which is the smallest footprint and the lightest vehicle of the four models.
No, that is the turning radius. The minimum right-angle passing width is 1,350 mm, and it should be checked with the load on board rather than empty.
LSLAM or QR-code navigation with differential drive and a touchscreen HMI, and positioning accuracy of ±10 mm and ±1°.
No. The software interface is defined per project, so any connection to warehouse or production systems is agreed as part of the project scope and confirmed in the quotation.
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
