- Six gas channels in one payload Carbon monoxide, hydrogen sulphide, oxygen, combustible gas, carbon dioxide and nitrogen oxides are all measured by a single unit on the robot.
- Temperature and humidity on the same unit The module reads −40 °C to +70 °C at 0.1 °C resolution and 0–100 %RH at 1 %RH alongside the gas channels.
- Sensing method matched to each gas Electrochemical cells cover CO, H2S, O2 and NOx, an infrared cell covers CO2 and an industrial-grade catalytic combustion element covers combustible gas.
- Resolution down to 0.01 ppm Hydrogen sulphide and nitrogen oxides are resolved to 0.01 ppm and carbon monoxide to 0.1 ppm across their measuring ranges.
- Built for the Deep Robotics M20 This version is specified for the M20 platform, which supplies both power and control to the payload.
- Readings on the robot's own operator station Imagery and control run through the M20's handheld controller and software, so no separate instrument has to be carried or read on site.
Description
This is the six-in-one gas detection payload for the Deep Robotics M20 quadruped. It carries six gas channels and a temperature and humidity channel in one housing, so a walking robot can take an atmosphere reading into a space before a person follows it.
The six channels are carbon monoxide, hydrogen sulphide, oxygen, combustible gas, carbon dioxide and nitrogen oxides. Each has its own detection range and resolution, and each uses the sensing method suited to the gas: electrochemical cells for the four toxic and oxygen channels, an infrared cell for carbon dioxide and a catalytic combustion element for combustible gas.
The module takes power and control from the robot, and its readings and imagery reach the operator through the robot's controller and software. That makes it a payload decision rather than a standalone instrument: the robot carries it, and the robot's own operator station is where the readings appear.
The MS600-W-7 is the same sensor suite built for the X30 instead. The two versions share identical measurement ranges, and the model suffix designates which robot the unit fits — the difference ends there, so order against the robot you actually operate. Housing dimensions, weight, power draw, ingress rating and the calibration interval are confirmed with the order.
Key Capabilities
- Six gas channels in one payload: Carbon monoxide, hydrogen sulphide, oxygen, combustible gas, carbon dioxide and nitrogen oxides are all measured by a single unit on the robot.
- Temperature and humidity on the same unit: The module reads −40 °C to +70 °C at 0.1 °C resolution and 0–100 %RH at 1 %RH alongside the gas channels.
- Sensing method matched to each gas: Electrochemical cells cover CO, H2S, O2 and NOx, an infrared cell covers CO2 and an industrial-grade catalytic combustion element covers combustible gas.
- Resolution down to 0.01 ppm: Hydrogen sulphide and nitrogen oxides are resolved to 0.01 ppm and carbon monoxide to 0.1 ppm across their measuring ranges.
- Built for the Deep Robotics M20: This version is specified for the M20 platform, which supplies both power and control to the payload.
- Readings on the robot's own operator station: Imagery and control run through the M20's handheld controller and software, so no separate instrument has to be carried or read on site.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Eranntex |
|---|---|
| Model | MS600-W-6 |
| Product Type | Six-in-one gas detection payload with temperature and humidity |
| Compatible Platform | Deep Robotics M20 |
| Temperature Measurement | −40 °C to +70 °C, resolution 0.1 °C |
| Humidity Measurement | 0–100 %RH, resolution 1 %RH |
| Carbon Monoxide (CO) | 0–1,000 ppm, resolution 0.1 ppm, electrochemical sensor |
| Hydrogen Sulphide (H2S) | 0–100 ppm, resolution 0.01 ppm, electrochemical sensor |
| Oxygen (O2) | 0–30 %vol, resolution 0.01 %vol, electrochemical sensor |
| Combustible Gas (EX) | 0–100 %LEL, resolution 0.1 %LEL, industrial-grade catalytic combustion sensor |
| Carbon Dioxide (CO2) | 0–5,000 ppm, resolution 1 ppm, infrared sensor |
| Nitrogen Oxides (NOx) | 0–100 ppm, resolution 0.01 ppm, electrochemical sensor |
| Robot Interface | Power and control supplied by the robot |
| Controller Interface | Image and control |
| Software Interface | Image and control |
| Dimensions | Confirm at quote |
| Weight | Confirm at quote |
| Power Draw | Confirm at quote |
| Ingress Protection | Confirm at quote |
| Calibration Interval | Confirm at quote |
Industries
Frequently Asked Questions
Six: carbon monoxide (0–1,000 ppm), hydrogen sulphide (0–100 ppm), oxygen (0–30 %vol), combustible gas (0–100 %LEL), carbon dioxide (0–5,000 ppm) and nitrogen oxides (0–100 ppm). It also reads temperature from −40 °C to +70 °C and humidity from 0 to 100 %RH.
The Deep Robotics M20. The equivalent unit for the X30 is the MS600-W-7, which is listed separately.
The payload draws power and control from the robot, and its imagery and control run through the robot's controller and software rather than a separate handheld instrument.
The measurement ranges and sensing methods are identical. The difference is the platform each version is specified for — M20 for the W-6, X30 for the W-7 — so order against the robot you operate and we confirm the fit with the quotation.
They are confirmed in writing with the order, along with the calibration interval and whether a calibration certificate is supplied.
The Eranntex MS600-W-6 Gas Sensor for Deep Robotics M20 is priced at 34.600 kr in your market.
Eranntex MS600-W-6 Gas Sensor for Deep Robotics M20
- Regular price
- 34.600,00 kr
- Sale price
Recently Viewed
You haven't viewed any products yet.
